Do It Yourself Hook Disgorger - The Fisherman

Do It Yourself Hook Disgorger

2017 9 Do It Yourself Hook Disgorger

You can easily build your own hook disgorger for a few cents by sawing down an old wooden broom or mop stick to about eight inches, and screw in a 2-9/16-inch ceiling type hook screw available at Loews, Home Depot or your local hardware store. While you should be able to screw the hook into the base of the stick or dowel, you can also use a 1/8 drill bit to drill down about ¼ inch, or just enough to get the screw started for an easy screw down. Once it’s complete, simply run the disgorger down the line and to the hook, where a quick twist of the disgorger will remove the hook quickly and easily without touching the fish.


2017 4 Top Lures Flies Baits For Trouts Art

Tip of the Month: Best Baits and Lures for Spring Trout

2017 12 Make Your Own Boot Top

Make Your Own Boot Remover

Slipping out of a pair of boot foot waders is not always as easy as it should be, especially if the boot foot is a little on the tight side.

2017 11 Juice It Up

Juice It Up!

Scents are a product that I firmly believe in, especially when employing the liquid on artificial lures for fluke and sea bass.